Free-Form Memory Organization - Allocation of memory dynamically and efficiently as it is needed.Also connect an external antenna for improved reception of distant or weak signals. High Speed PC Interface - Use a USB Scanner programming cable for full duplex mode at 6 times the speed of previous scanner models for PC transfer and 8 times the speed of previous models for radio to radio cloning.This differs from low cost and older scanners that had memory organized in rigid and wasteful memory banks.
High speed special USB to scanner programming cable included. LTR Home Repeater AutoMove - Takes the guesswork out of programming LTR trunking systems when the home repeater order is not known.Lock-out Function - Skip over specified channels or frequencies when scanning or searching.Key Lock - Lock the scanner’s keys to help prevent accidentally changing the scanner’s programming.Clones with another WS1040 handheld or with another WS1065 desktop/mobile scanner. Multi-System Trunking - Scans most common trunked radio system signaling formats, including Motorola, EDACS, LTR and P25 trunked radio networks.Menu Driven Programming with Context Sensitive Help - Each menu item provides a few lines of help text that provide assistance with programming and using the scanner.Memory Backup - Frequencies remain stored in memory for an extended time even without batteries.Enter the LTR system frequencies in any order, and the WS-1040 will automatically move the frequencies to the proper home repeater slots as transmissions are received on the system.
Object Oriented User Interface - Exclusive to Whistler, features common data entry, browsing and control methods are used for every scannable object.Both talkgroup and individual call monitoring are supported. P25 NAC Functionality - P25 Network Access Code (NAC) is used to provide selective squelch operation on conventional digital channels.All are programmed and stored in the same way. Your WS1040 will detect the NAC that is being used on a P25 conventional digital channel, and allow you to program NAC codes to block transmissions that do not have a matching NAC, including analog traffic on the same frequency.
(BuTel ARC500, PSREdit500 or Win500 software required) Arc500 vs win500 update# Real-time Signal Strength Indicator - Shows relative strength of received signals.Priority Channel - set the scanner to check one channel every two seconds while scanning.
0 kommentar(er)
